The air conditioning does not turn on?

If you have problems automatically switch your central air conditioner, with you the following steps.

1) Set the thermostat to "cool". Make sure the temperature is set well below the current temperature or the actual temperature of the room.

Air

2) The central air conditioning system should have its own 240-volt circuit. Locate the main electrical box (or plate) usually on the inner walls of a garage. Testing interventionCircuit breaker or blown fuse. When the air conditioner blew up or blown back, or replace the fuse.

3) Make sure the power switch in the oven "on" position. Next, look for a switch of the outdoor unit. This is the capacitor on / off switch. Make sure it is turned off. Now, make sure that the 240-volt, there are (whether it should be in a metal box usually on the outside wall near the unit) next to compressor is still on.

4) Make sure the powerthe air conditioning is turned off. Now control the thermostat. Take the outside of the body of the thermostat. Remove the Y-cable terminal and the power again.

5) Now we have to run tests. Take the wire through the rubber coating. Do not touch metal with your fingers. Take the exposed metal wire and hold it with the Y-terminal R for a few minutes. When the compressor turns on, you have a faulty thermostat. Call a technician. If the compressor does not kick, turnthe unit and call a technician.

http://www.easyac.net

The air conditioning does not turn on?